Info

You are currently browsing the SustainTechs weblog archives for the day 5. June 2008.

Calendar
June 2008
M T W T F S S
« May   Jul »
 1
2345678
9101112131415
16171819202122
23242526272829
30  

Archive for 5. June 2008

Artemis Intelligent Power Ltd

Artemis Intelligent Power Ltd

Unit 3 Edgefield Industrial Estate
Loanhead
Midlothian EH20 9TB

 

Tel : +44 131 516 8606
Fax : +44 131 440 0005

About
Artemis Intelligent Power is based in Edinburgh, Scotland. The perform research, development, and technology licensing associated with development and applications of Digital Displacement® hydraulic power technology, and other innovations in the control and transmission of fluid power.

Spun out of fluid power research at the University of Edinburgh in 1994, Artemis has grown steadily through its long term development projects with market-leading industrial partners. These partners’ varied needs and applications continue to drive Digital Displacement® technology forward. Artemis is a diverse, multidisciplinary team of engineers and technicians with an international flavor.

Artemis has developed four major partnerships, with a large oil company, with two Tier One automotive suppliers and with a leading manufacturer of off-road mobile hydraulics to apply the Artemis core technology in their sectors. In the course of this it has built component and technology demonstrators for both small and very large applications.

Technology

Artemis Digital Displacement® technology replaces the port plates and swash plates in conventional hydraulic machines with computer controlled high speed solenoid valves.

 

The core component of a Digital Displacement® system is a hydraulic piston pump/motor with actively controlled poppet valves which rectify the flow into, and out of, each cylinder. The cylinders are generally disposed radially around an eccentric with valving around the periphery. Banks of cylinders can be assembled along a common crankshaft to allow multiple independent outputs. The valves are each operated by a small electro-magnetic latch so that they can be opened and closed on a stroke-by-stroke basis. The solenoid coil in each latch is activated by a power FET, which is in turn connected directly to the digital output of an embedded controller.

WaterSaver Technologies, LLC

WaterSaver Technologies, LLC

Corporate Office
WaterSaver Technologies LLC
120 Webster Street, Suite 322
Louisville, KY 40206

PH: 502 741 1859 (Tom Reynolds, President/CEO)
PH: 502 550 1506 (Mark Sanders, Chairman/Inventor)
FAX: 502 228 1858

EMAIL: info@watersavertech.com

About

WaterSaver Technologies, LLC, was established to deliver water saver products to a world desperate for conservation. Their most recent innovation is a patented (#6,276,005) water saving device called the AQUS®.

The AQUS is based on the concept that using fresh water to flush the toilet is both unnecessary and wasteful. The AQUS system conserves water by reusing greywater from the bathroom sink to flush the toilet, thereby conserving the fresh water normally used. The device is a low maintenance, low cost, and highly effective water saving device.

The AQUS is a small scale system for conserving water, and has a wide range of water saving applications including single family residences, apartments, condominiums, hotels, office buildings, schools, and government buildings. The system can assist architects, engineers, and developers in achieving their LEED certification and green building goals by contributing to water efficiency, waste water reduction and innovation points. WaterSaver Technologies produces Water Saving Products that support Green Building. WaterSaver Technologies is dedicated to delivering superior water saver products and is continually developing products to reach that goal.

The AQUS Greywater Recycling System

The AQUS is a small scale greywater recycling system that uses treated water that is captured from the bathroom sink to flush the toilet – and accomplish greywater recycling in the process.

The system consists of two parts; 1) the Fill Control Unit and 2) the Vanity Tank. The Fill Control Unit effectively clips onto the back of the customer’s toilet and holds the fill valve up, in the off position, which allows the Vanity Tank located under the bathroom sink to fill the tank with treated and recycled sink water. The system does not shut off the fresh water supply or cross connect to it. It simply holds the fresh water “OFF” until it is needed to supplement the toilet fill.

|